Benefits:
100% SEAMLESS WATERPROOF MEMBRANE- APPLIED DIRECTLY OVER RUST - NO PRIMING
- NON-TOXIC, NO VOC'S
- LOWERS ENERGY COSTS
- UP TO 20 YEARS OF PROTECTION
Steps
- 1. Seal roof leaks
Tighten or replace loose fasteners. Seal flashing, penetrations, fasteners and seams
- 2. Clean roof
Pressure wash and remove old loose coatings
- 3. Coat roof
Brush, roll or spray roof with HVLP 2000 "instant set" system combining waterproofing and
corrosion protection into 1 simple step
- 4. Optional
Top coat for custom colors and solar reflective energy savings
Advantages
Refurbishing metal roofs with MetalSafe™ Coatings is a cost effective solution that will dramatically reduce cooling costs and extend roof life. Even rusted roofs become sustainable deferring roof replacement indefinitely.
Don’t waste time with multiple coatings when 1 coat of MetalSafe™ performs better than the rest!
Cost savings
- Affordable material cost
- Reduced Labor
- Cover up to 10,000 sq. ft. / day
- Lower energy costs 15 + %
- No disruption to business operations
- Ease of repair and maintenance
- Superior elongation and technology
- No primer or sandblasting required
- Resists chemicals and acid rain
- Reduce heat island and greenhouse effect
- Used worldwide
- Cold applied
- No solvents, toxins or VOC’s
- Environmentally safe
Products
MetalSafe™ B-300
Refurbishing metal roofs with MetalSafe™ Coatings is a cost effective solution that will dramatically reduce cooling costs and extend roof life. Even rusted roofs become sustainable deferring roof replacement indefinitely.
Don't waste time with multiple coatings when 1 coat of MetalSafe™ performs better than the rest!
MetalSafe™ A-300
MetalSafe™ A-300 is a water based liquid applied waterproof coating comprised of a proprietary blend of both elastomeric and acrylic polymers that cures to a seamless membrane. MetalSafe™ A-300 is available in a range of architectural colors.
Containing no solvents, A-300 is non-flammable and is compatible with polyurethane, polystyrene and other insulating materials to provide moisture and UV protection. A-300 is recommended for a wide variety of surface materials in both interior and exterior use. A-300 has excellent reflectivity and UV resistance to sunlight.
MetalSafe™ S-300
MetalSafe™ S-300 is a single component, liquid applied waterproofing sealant combining elastomeric and acrylic polymers for a high solids quick drying membrane.
Containing no solvents, MetalSafe™ S-300 is non-flammable and will not damage polyurethane or polystyrene insulation materials. A variety of different reinforcing fabrics can be embedded into the membrane to produce superior waterproofing protection.
MetalSafe™ Seam tape & Reinforcing Fabric
MetalSafe™ Seam tape is used to bridge gaps and cracks in preparing vents, protrusions, fasteners and seams. It conforms to virtually any shape and accepts coatings with its mesh backing.
Stitchbond polyester is one of the strongest materials available as reinforcement in cold process roofing. It offers an unusual combination of high strength properties, delivering good elongation for excellent thermal stress force accommodations.
MetalSafe™ Bulk Caulking Gun & MetalSafe™ Gel Grade Sealant
Fast effective way to seal panel seams, screw heads, cracks and penetrations.
Application specification
Brochure
Top coat for custom colors and solar reflective energy savings
or if you want to print the brochure – full-resolution PSD file is available for download
Download full-resolution brochure
