FAQ's

Liquid Rubber Waterproof Sealant is waterbased and curing is dependant on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.

Liquid Rubber Waterproof Sealant final dry film thickness (DFT) will vary depending on the application. Generally for horizonatal/flat waterproofing you will want a minimum of 2mm (80 mil, 0.0787") DFT. Coverage is approximately 3.34L / 1 sq. m. or 12 sq. ft. / 1G. For vertical applications you will want a minimum of 1.5mm (60 mil, 0.0591") DFT. Coverage is approximately 2.5L / 1 sq. m. or 16 sq. ft. / 1G. For constant ponding/submersion you will want upwards of 3mm (120 mil, 0.118"). Coverage is approximately 5L / 1 sq. M. or 8 sq. ft. / 1G.

Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.

Liquid Rubber Seam Tape (add link http://liquidrubber.ca/collections/products-page/products/seam-tape) is used to bridge gaps, cracks, seams, vents, protrusions…..

It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time inbetween.

No, Liquid Rubber Waterproof Sealant has specially designed polymers that are UV resistant.

Yes, it is a waterbased product containing no solvents or VOC's (volatile organic compounds).

Liquid Rubber Waterproof Sealant only comes in black but can be top coated with Liquid Rubber Smooth Sealant (link to http://liquidrubber.ca/collections/products-page/products/liquid-rubber-flexicolor) or Liquid Rubber Textured Sealant (link to http://liquidrubber.ca/collections/products-page/products/liquid-rubber-tough-sealant).

Currently we do not have a certification allowing this use.

Soap and water, baby oil, bristle brush

Liquid Rubber Waterproof Sealant should be applied above 5°C (41°F). Avoid hot, direct sunlight applications as well.

Small air bubbles can form from using a roller. This will dissapate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see large blisters, this is usually an indication of mositure underneath the membrane.

Generally no. Smooth Sealant adds waterproofing resistance however it is more cost effective to use Liquid Waterproof Sealant (add link http://liquidrubber.ca/collections/products-page/products/liquid-rubber-waterproof-sealant) and/or Liquid Rubber Seam Tape (add link http://liquidrubber.ca/collections/products-page/products/seam-tape) as your waterproof membrane and then build Smooth Sealant on top.

Liquid Rubber Smooth Sealant is waterbased and curing is dependant on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 0.5 mm (20 mil, 0.0197") will take approximately 3 - 4 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.

Liquid Rubber Smooth Sealant final dry film thickness (DFT) will vary depending on the application. Generally for most applications you will want a minimum of 0.5mm - 1mm (20 - 40 mil, 0.0197 - 0.0394") DFT. Coverage is approximately 0.9 - 1.79L / 1 sq. m. or 46 - 23 sq. ft. / 1G.

Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.

It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time inbetween.

No, Liquid Rubber Textured Sealant has specially designed polymers that are UV resistant.

Yes, it is a waterbased product containing no solvents or VOC's (volatile organic compounds).

Liquid Rubber Smooth Sealant comes in standard colorss of White, Black, Light Grey, Dark Grey and Tan. It also comes in a medium tintable base which your local paint store can tint to your desired color.

Soap and water, bristle brush

Liquid Rubber Smooth Sealant should be applied above 10°C (10°F). Avoid hot, direct sunlight applications as well.

Generally no. Textured Sealant adds waterproofing resistance however it is more cost effective to use Liquid Waterproof Sealant (add link http://liquidrubber.ca/collections/products-page/products/liquid-rubber-waterproof-sealant) and/or Liquid Rubber Seam Tape (add link http://liquidrubber.ca/collections/products-page/products/seam-tape) as your waterproof membrane and then build Textured Sealant on top.

Liquid Rubber Textured Sealant is waterbased and curing is dependant on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 0.5 mm (20 mil, 0.0197") will take approximately 3 - 4 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.

Liquid Rubber Textured Sealant final dry film thickness (DFT) will vary depending on the application. Generally for most applications you will want a minimum of 0.5mm - 1mm (20 - 40 mil, 0.0197 - 0.0394") DFT. Coverage is approximately 0.93 - 1.85L / 1 sq. m. or 44 - 22 sq. ft. / 1G.

Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.

It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time inbetween.

No, Liquid Rubber Textured Sealant has specially designed polymers that are UV resistant.

Yes, it is a waterbased product containing no solvents or VOC's (volatile organic compounds).

Liquid Rubber Smooth Textured comes in standard colorss of White, Black, Light Grey, Dark Grey and Tan. It also comes in a medium tintable base which your local paint store can tint to your desired color.

Soap and water, bristle brush.

Liquid Rubber Textured Sealant should be applied above 10°C (10°F). Avoid hot, direct sunlight applications as well.

Liquid Rubber MetalSafe Sealant is used for protecting and waterproofing on metal surfaces.

Yes, you can go over light rust with MetalSafe Sealant. It has corrosion inhibitor which removes the need for priming.

Liquid Rubber MetalSafe Sealant is waterbased and curing is dependant on temperature, air movement and humidity. In normal temperatures of 20 °C (68°F), 1 mm (40 mil, 0.0394") will take approximately 6 - 8 hours. Please keep in mind the thicker the product is applied in 1 coat, the curing time goes up exponentially. It is best to do lighter coats and build up your thickness.

Liquid Rubber MetalSafe Sealant final dry film thickness (DFT) will vary depending on the application. Generally for horizonatal/flat waterproofing you will want a minimum of 2mm (80 mil, 0.0787") DFT. Coverage is approximately 3.34L / 1 sq. m. or 12 sq. ft. / 1G. For vertical applications you will want a minimum of 1.5mm (60 mil, 0.0591") DFT. Coverage is approximately 2.5L / 1 sq. m. or 16 sq. ft. / 1G. For constant ponding/submersion you will want upwards of 3mm (120 mil, 0.118"). Coverage is approximately 5L / 1 sq. M. or 8 sq. ft. / 1G.

Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.

Liquid Rubber Seam Tape (add link http://liquidrubber.ca/collections/products-page/products/seam-tape) is used to bridge gaps, cracks, seams, vents, protrusions

It is not recommended to the apply your final thickness in 1 application. It is best to build up your thickness in multiple coats allowing curing time inbetween.

No, Liquid Rubber MetalSafe Sealant has specially designed polymers that are UV resistant.

Yes, it is a waterbased product containing no solvents or VOC's (volatile organic compounds).

Liquid Rubber MetalSafe Sealant only comes in black but can be top coated with Liquid Rubber Smooth Sealant (link to http://liquidrubber.ca/collections/products-page/products/liquid-rubber-flexicolor) or Liquid Rubber Textured Sealant (link to http://liquidrubber.ca/collections/products-page/products/liquid-rubber-tough-sealant).

Currently we do not have a certification allowing this use.

Soap and water, baby oil, bristle brush

Liquid Rubber Waterproof MetalSafe should be applied above 5°C (41°F). Avoid hot, direct sunlight applications as well.

Small air bubbles can form from using a roller. This will dissapate as you build the membrane. Applying in hot, direct sunlight can cause the product to rapidly cure and cause small blisters. If you see large blisters, this is usually an indication of mositure underneath the membrane.

Liquid Rubber Seam Tape is used for sealing roof joints and tears, flashings, skylights, gutters, ets.

Liquid Rubber Seam Tape sticks to virtually most surfaces xcept for silicone.

Yes, the seam tape will begin to break down from UV.

Apply to a dry surface which is free of dirt, debris, oil, grease, coal tar, efflorescence, flaking paint, silicone, solvenated materials or other contaminants.

Liquid Rubber Seam Tape is a pressure sensitive adhesive. Apply and add pressure with your hands or a roller.