Liquid Rubber CreteSafe

Data Sheets & MSDS:

The Liquid Rubber CreteSafe product line has been designed to provide superior protection for concrete surfaces. Once applied, the CreteSafe coating forms a flexible membrane that protects the surface with the following properties:

  • Prevents water damage and water infiltration
  • Protects from chemical, acid and salt attack
  • Resists hydrostatic pressure
  • Guards against abrasion & erosion
   

All CreteSafe coatings cure to form a seamless membrane with excellent adhesion that completely seals the concrete to prevent water and chemicals from reaching the surface. Patent-pending enhancements allow CreteSafe® products to be applied at -5C and withstand freeze/thaw cycles that will extend the season to permit year-round application.

CreteSafe B-250 & B-350

The tough, highly elastic waterproofing properties of the CreteSafe bitumen based products provide puncture resistance, flexibility and strength that bridges cracks while maintaining their structural integrity under physical and thermal stress.

   

Liquid Rubber A-200 & T-300 Topcoats

The acrylic based CreteSafe products deliver excellent protection from chemical attacks and abrasion that break down concrete surfaces. These products are tintable and can be applied in a smooth or textured finish to provide extra grip in slippery environments.

   

Liquid Rubber CreteSafe solutions provide safe, cost effective waterproofing and abrasion protection for all concrete structures including:

  • Above and below grade foundation structures including poured concrete, CMU’s, ICF’s, PWF’s
  • Tunnels
  • Containment basins
  • Parking garages and parking decks
  • Terrace decks and balconies
  • Retaining walls
  • Pre-cast pipe
  • Docks and piers

How is CreteSafe Applied?

CreteSafe products consist of either elastomeric modified bitumen or acrylic emulsions that are combined with polymers that marry traditional waterproofing materials with modern polymer technology to enhance these waterproofing and protection properties.

The resulting CreteSafe products deliver the following features:

  • Long term UV resistance
  • Seamless and a resilient membrane
  • Low permeation, water and air (exceptional waterproofing)
  • Salt, acid and chemical resistivity
  • Excellent adhesion
  • Excellent elongation and recovery, flexibility and the ability to bridge cracks
  • No VOC’s, non-flammable, low odor

How Does CreteSafe Work?

CreteSafe products are cold applied as a liquid at ambient or sub-zero temperatures and cure to form a fully adhered seamless and flexible membrane.

All CreteSafe products can be applied to the surface using a sprayer, brush or roller that will result in a 40 mil to 80 mil dried coating, depending on the application. CreteSafe B-150 and B-250 can be applied to produce an “instant-set” membrane that is ideal for building thickness for waterproofing vertical surfaces.

Unlike other conventional waterproofing or protective coatings, the application benefits reduce labor costs and increase worker safety.

  • No open flame or hot liquid to apply
  • Non-toxic and flammable solvents
  • No seams to seal or adhesives to apply

Liquid Rubber CreteSafe products provide long term waterproofing where temperatures vary from -40 ̊C to 80 ̊C. In addition to superior waterproofing and concrete protection, CreteSafe products provide contractors flexibility in application, including instant-setting spray application that can be applied at below freezing temperatures.